Use the Hole command to create a General Screw Clearance for an M8 screw on center with the smaller top cylinder.Draw a Ø 25 mm circle on the top face of the model that is centered on the larger lower cylinder.Hint: Tap the shift key to toggle symmetry. Use the 3 regions to symmetrically extrude 50 mm.Mirror the arc to the other side about the Y vector.Draw a Tangent Arc starting at about the 5 o’clock position on the upper circle, Set the radius to 20 mm, and conclude tangent and connected to the bottom circle.Draw a second circle Ø 30 mm above the first and be sure their centers are aligned vertically.Draw a Ø 40 mm circle on the Top plane (x,y plane) with its center at the origin point of the base coordinate system.Open the dialog and set auto-dimensioning as shown. ![]() ![]() Before we start, navigate to the Sketching Tab and locate.Start by creating a NEW part file using a Metric Part template. ![]() Download the text guide or follow along below.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |